About EcoSystem Plus®

EcoSystem Plus® is breakthrough bio-catalytic product that increases dissolved oxygen transfer rates and dissolved oxygen (DO) levels in the water column.

EcoSystem Plus® improves the biological oxidation performance of aerobic wastewater treatment systems, on a dose-responsive basis.

EcoSystem Plus® increases the solubility of organic wastes, including the more problematic FOG’s (Fats, Oils, and Greases).

EcoSystem Plus® enhances anaerobic conversion rates in biogas fermenters. It allows for optimization and increased loading of TVS (Total Volatile Solids).

EcoSystem Plus® reduces the volume of sludge, improves sludge quality, and greatly reduces odorous volatile compounds (VOCs).

Key operational benefits include:
• Improves oxygen (DO) Transfer.
• Reduces aeration energy.
• Optimizes anaerobic digestion.
• Improves bio-solids and sludge management.
• Reduces noxious odors.
• Improves wastewater discharges.

Application rate/concentration

Directions for use
EcoSystem Plus® can be injected into water lines, aeration devices, and sludge lines. Dosage rates will vary depending on numerous factors, including organic loading levels, and specific operator objectives.

Aerobic Wastewater Treatment: 1 ppm EcoSystem Plus® per 100 BOD in organic loading is the basic metric used. In deployment, dissolved oxygen (DO) readings will guide dosing rate. Operator will adjust dosage rate to desired DO level.

Anaerobic Digestion: The basic dosage metric is: 250 ml up to 1,000 ml, per dry ton of Volatile Solids (VS).

Consult with technical specialist to optimise installation and performance of EcoSystem Plus®.

Product Specification
EcoSystem Plus® is non-toxic, non-caustic, and safe to handle, with a recommended shelf life of two years. May be stored with confidence at temperatures below 122°F/50°C.

Water, highly purified yeast extracts, non-ionic surfactants.

Keep out of the reach of children. If product from this container splashes in eyes, rinse well with water.

Further information

Information on Basic Physical and Chemical Properties Appearance
Physical State – Liquid
Color – Colorless – pale amber
Odor – Mild
pH – Full Strength Concentrate 3.9 – 4.3. At recommended use dilutions, pH ranges 6.3 to 6.9
Freezing Point – See Pour Point
Boiling Point (760 mmHg) – > 100 °C at 760 mmHg
Calculated Flash Point – ASTM D 93 Closed Cup >93oC
Density (water = 1) – 1.002 @ 20°C / 20°C
Water Solubility – 100% in water
Kinematic Viscosity – @ 40oC 2.3373 cst
Pour Point – 2.22°C or (+28°F)

Environmental fate: Persistence and Degradability
The material is readily biodegradable. Passes OECD test(s) for ready biodegradability.

Official UK and European Distributor

Alps Ecoscience UK Ltd The Metro Centre, 5 Toutley Rd, Wokingham, RG41 1QN

+44 118 9892 444


How you benefit

Already working with…